3039 Cornwallis Rd.RTP, NC 27958
NEXTSTEP for Intel Processors
Tested Compatible System
| Title: | IBM PC 365 |
| Last Updated: | September 17 1996 |
| Product Vendor: | IBM Corporation |
3039 Cornwallis Rd.
RTP, NC 27958
Explanation of Compatibility Testing
NEXTSTEP Compatible systems are tested by third parties using a test procedure developed by NeXT. NeXT approves the use of the "NEXTSTEP Compatible" designation for these systems based on the completeness of the test results submitted by these NeXT-trained 3rd parties.
For more detailed information on the NICE program, please refer to NeXTanswers document 1903_Compatible_Systems_Tested_With_NEXTSTEP.rtf
| Note: | NeXT accepts no support responsibilities or liability whatsoever for any |
| system | authorized to use the "NEXTSTEP Compatible" designation, nor does NeXT |
| represent | that their test procedures or training--even if followed exactly by the 3rd |
| party | performing the test work--are in any way complete or exhaustive. Known or |
| unknown | errors may be present in configurations which are designated as |
| "NEXTSTEP | Compatible" which could adversely affect the operation of these |
| systems. | Support for compatible systems may be provided by the PC vendor or |
| System | integrator. |
Tested Components:
IBM reports testing a system configuration consisting of the following components:
Summary information only. Contact IBM for more specific configuration information
System CPU Board(s)
| CPU: | Intel Pentium Pro (P6-200), 200MHz | |
| RAM: | 32 MB maximum tested |
SCSI Controller(s)
| Manufacturer: | Adaptec | |
| Model name: | 2940UW |
CD-ROM Drive(s)
| Manufacturer: | IBM | |
| Model no.: | 61G1896 | |
| Interface: | SCSI |
Hard Drive(s)
| Manufacturer: | Western Digital | |
| Model name: | Caviar 21600 | |
| Model no.: | 75H7493 | |
| Size: | 1.6GB |
Graphics Adaptor(s)
| Manufacturer: | IBM | |
| Model name: | S3 | |
| Video RAM: | 2 Meg | |
| RAM Type: | EDO DRAM 60ns | |
| Interface: | PCI |
Serial Port(s)
| Ports: | 1 | |
| UART: | UART 16550A |
Parallel Port(s)
| Ports: | 1 |
Keyboard(s)
| Manufacturer: | IBM | |
| Model name: | KB-8925 | |
| Interface: | PS/2 | |
| # of keys: | 104 |
Mice and Other Pointing Devices
LAN Adaptor(s)
| Manufacturer: | 3Com | |
| Model name: | EhterLink III Parallel Tasking 16-bit 10BASE-T adapter | |
| Interface: | ISA | |
| Connectors: | *TP, AUI |
* Adaptor tested with this connector
Sound Card(s)
| Manufacturer: | n/a |
Monitor(s)
| Manufacturer: | IBM | |
| Model name: | P200 |
Note that only the specific components listed were tested.
Setup and Installation
Hardware Setup:
See above for individual setup instructions for each adaptor.
CMOS settings:
To Access:
Settings:
To Access: F1 on power up (cold boot only)
ECU settings (EISA-bus systems only):
n/a
Special installation instructions:
Driver settings:
Use Configure.app to load and configure the following drivers:
-------Boot drivers------
SCSI Adaptec2940SCSIDriver
Default Table: Default
Auto Detect IDs: 0x70789004 0x71789004 0x72789004 0x73789004 0x74789004 0x75789004 0x76789004 0x77789004 0x78789004 0x79789004 0x7a789004 0x7b789004 0x7c789004 0x7d789004 0x7e789004
Share IRQs: YES
Class Names: SCSIBus Adaptec2940
Cmd Queueing: NO
Bus Type: PCI
Share IRQ Levels: Yes
Driver Version: PROJECT:drvAdaptec2940-8
Synchronous: YES
Level IRQs: YES
Disk IDE
Use Disk Geometry: Yes
Default Table: Default
Character Major: 15
I/O Ports: 0x1F0-0x1F7
Class Names: IdeController IdeDisk
Driver Version: PROJECT:ideDriver-12
IRQ Levels: 14
Block Major: 3
Serial SerialPorts
I/O Ports: 0x3f8-0x3ff 0x2f8-0x2ff
Default Table: Default
Driver Version: PROJECT:serialdriver-5.4
IRQ Levels: 4 3
Port Count: 2
Disk Floppy
DMA Channels: 2
Default Table: Default
Character Major: 41
I/O Ports: 0x3f2-0x3f7
Class Names: FloppyController FloppyDisk
Driver Version: PROJECT:floppyDriver-5.4
IRQ Levels: 6
Block Major: 1
Keyboard PS2Keyboard
Default Table: Default
Interface: 3
I/O Ports: 0x60-0x65
Class Names: PS2Controller PS2Keyboard
Handler ID: 0
Driver Version: PROJECT:kbdmicedrivers-16
IRQ Levels: 1
Bus PCIBus
Driver Version: PROJECT:kernbus-13
Default Table: Default
Class Names: PCIResourceDriver
Bus EISABus
Default Table: Default
I/O Ports: 0x00-0x0f 0x20-0x21 0x40-0x4b 0x70-0x71 0x81-0x8F 0x92-0x92 0xc0-0xcf
Class Names: EISAResourceDriver
Driver Version: PROJECT:kernbus-13
IRQ Levels: 2
Other Intel824X0
Default Table: Default
Auto Detect IDs: 0x04838086 0x04A38086
Class Names: Intel824X0
Bus Type: PCI
Driver Version: PROJECT:drvIntel824X0PCI-5
-------Active drivers------
Pointing Device PS2Mouse
Inverted: No
Default Table: Default
Resolution: 150
Class Names: PS2Mouse
Driver Version: PROJECT:kbdmicedrivers-16
IRQ Levels: 12
Network EtherLink3
Default Table: Default
I/O Ports: 0x300-0x30f 0x110-0x110
Driver Version: PROJECT:enetdrivers-13
IRQ Levels: 10
Connector: RJ-45
Display S3GenericDisplayDriver
Memory Maps: 0x03800000-0x03ffffff 0xa0000-0xbffff 0xc0000-0xcffff
Display Mode: Height: 600 Width: 800 Refresh: 60Hz ColorSpace: RGB:888/32
0-desc: Unknown adapter type continuing anyway
Auto Detect IDs: 0x88805333 0x88b05333 0x88c05333 0x88d05333 0x88d15333 0x88115333
Parallel ParallelPort
Pre-Load: RemovePPDev
I/O Ports: 0x378-0x37f
Port Count: 1
Driver Version: PROJECT:paralleldrivers-10
IRQ Levels: 7
Minor Device Number: 0
Known Problems
Must disable Advanced Power Management in order to load Neststep. Go into IBM SurePath BIOS using the F1 key using a cold boot. Select Advanced Power Management and Disable APM BIOS mode.
| See Also: | (None) |