on-board, LPT1
NEXTSTEP for Intel Processors
Tested Compatible System
| Title: | eCe5100 |
| Last Updated: | September 14 1995 |
| Effective Date: | August 29th 1995 |
| Tested with: | 3.3 |
Product Vendor:
eCesys Computer
45250 Northport Court
Fremont, CA 94538
email: info@ecesys.com
WWW Page: http://www.mediacity.com/
Tel. 510 226-7800 ext. 304 Pam Pimental
Explanation of Compatibility Testing
NEXTSTEP Compatible systems are tested by third parties using a test procedure developed by NeXT. NeXT approves the use of the "NEXTSTEP Compatible" designation for these systems based on the completeness of the test results submitted by these NeXT-trained 3rd parties.
For more detailed information on the NICE program, please refer to NeXTanswers document 1903_Compatible_Systems_Tested_With_NEXTSTEP.rtf
| Note: | NeXT accepts no support responsibilities or liability whatsoever for any |
| system | authorized to use the "NEXTSTEP Compatible" designation, nor does NeXT |
| represent | that their test procedures or training--even if followed exactly by the 3rd |
| party | performing the test work--are in any way complete or exhaustive. Known or |
| unknown | errors may be present in configurations which are designated as |
| "NEXTSTEP | Compatible" which could adversely affect the operation of these |
| systems. | Support for compatible systems may be provided by the PC vendor or |
| System | integrator. |
Tested Components:
eCesys reports testing a system configuration consisting of the following components:
Summary information only. Contact eCesys for more specific configuration information
System CPU Board(s)
| CPU: | INTEL Pentium, 100MHz | |
| RAM: | 32MB maximum tested | |
| ISA slots: | 2 | |
| PCI slots: | 3 |
SCSI Controller(s)
| Manufacturer: | Adaptec | |
| Model name: | 2940 | |
| Interface: | SCSI |
CD-ROM Drive(s)
| Manufacturer: | Toshiba | |
| Model name: | XM3401A | |
| Interface: | SCSI |
Hard Drive(s)
| Manufacturer: | Seagate | |
| Size: | 1 GB |
Graphics Adaptor(s)
| Manufacturer: | Diamond | |
| Model name: | Diamond Stealth Video 64 | |
| Video RAM: | 4 MB | |
| RAM Type: | VRAM | |
| Interface: | PCI |
Serial Port(s)
| Ports: | 2 | |
| UART: | 16C550 |
Parallel Port(s)
on-board, LPT1
Keyboard(s)
| Manufacturer: | Fujuitsu | |
| Model name: | 8720 | |
| Interface: | PC/AT | |
| # of keys: | 101 |
Mice and Other Pointing Devices
| Manufacturer: | Logitech | |
| Model name: | Bus Mouse | |
| Interface: | Bus |
LAN Adaptor(s)
| Manufacturer: | Cogent | |
| Model name: | EM960 Combo | |
| Interface: | PCI | |
| Connectors: | BNC*, AUI, TP. |
* Adaptor tested with this connector
Sound Card(s)
| Manufacturer: | Intel/Creative Lab Chipset | |
| Model name: | SoundBlaster 16 ViBRA | |
| Interface: | IDE |
Monitor(s)
| Manufacturer: | Nokia | |
| Model name: | 447X | |
| Size: | 17" |
| Max resolution: | 1600x1200@60Hz |
Note that only the specific components listed were tested.
Setup and Installation
Hardware Setup:
See above for individual setup instructions for each adaptor.
CMOS settings:
To Access:
press <F1> during bootup
Settings:
Factory settings (PCI will autoconfigure)
ECU settings (EISA-bus systems only):
na
Special installation instructions:
Driver settings:
Use Configure.app to load and configure the following drivers:
Display
DiamondStealthDisplayDriver
Network
Cogent EM960 PCI Ethernet Adapter (ver 3.31)
SCSI
Adaptec2940SCSIDriver
Audio
none
Other
BusMouse (ver 3.30)
ISA/EISA Bus Support(ver 3.30)
PCI Bus Support(ver 3.30)
PS/2 Style Keyboard (ver 3.30)
Floppy Disk Drive (ver 3.30)
On Board Serial Ports (ver 3.30)
On Board Parallel Port (ver 3.30)
Known Problems
This System will need to be set up to force bootup in verbose mode, when S3 based video cards are used.
| See Also: | (None) |