on-board, LPT1
NEXTSTEP for Intel Processors
Tested Compatible System
| Title: | Andromeda/133 |
| Last Updated: | December 13 1995 |
| Tested with: | 3.3 |
Product Vendor:
Applied Instruments
47757 Warm Springs Blvd.
Fremont, CA 94539
Tel: (510) 490-7117
Fax: (510) 490-7198
Explanation of Compatibility Testing
NEXTSTEP Compatible systems are tested by third parties using a test procedure developed by NeXT. NeXT approves the use of the "NEXTSTEP Compatible" designation for these systems based on the completeness of the test results submitted by these NeXT-trained 3rd parties.
For more detailed information on the NICE program, please refer to NeXTanswers document 1903_Compatible_Systems_Tested_With_NEXTSTEP.rtf
| Note: | NeXT accepts no support responsibilities or liability whatsoever for any |
| system | authorized to use the "NEXTSTEP Compatible" designation, nor does NeXT |
| represent | that their test procedures or training--even if followed exactly by the 3rd |
| party | performing the test work--are in any way complete or exhaustive. Known or |
| unknown | errors may be present in configurations which are designated as |
| "NEXTSTEP | Compatible" which could adversely affect the operation of these |
| systems. | Support for compatible systems may be provided by the PC vendor or |
| System | integrator. |
Tested Components:
Applied Instruments reports testing a system configuration consisting of the following components:
Summary information only. Contact Applied Instruments for more specific configuration information
System CPU Board(s)
| CPU: | Intel Pentium, 133 MHzMHz | |
| RAM: | 64 MBMB maximum tested | |
| ISA slots: | 4 (plus one slot in combo with PCI) | |
| PCI slots: | 3 (plus one slot in combo with ISA) |
SCSI Controller(s)
| Manufacturer: | Adaptec | |
| Model name: | Ultra Wide SCSI Master | |
| Interface: | PCI |
CD-ROM Drive(s)
| Manufacturer: | n/a |
Hard Drive(s)
| Manufacturer: | Quantum | |
| Interface: | Synchronous Wide SCSI-2 | |
| Size: | 2.05GB |
Graphics Adaptor(s)
| Manufacturer: | ATI | |
| Model name: | Graphics Pro Turbo | |
| Video RAM: | 2MB | |
| RAM Type: | VRAM, 70ns | |
| Interface: | PCI |
Serial Port(s)
| Ports: | 2 | |
| UART: | 16550A |
Parallel Port(s)
on-board, LPT1
Keyboard(s)
| Manufacturer: | NMB | |
| Model name: | Right Touch | |
| Interface: | AT (with AT to PS/2 adapter cable) | |
| # of keys: | 101 |
Mice and Other Pointing Devices
| Manufacturer: | Microsoft | |
| Model name: | Mouse | |
| Interface: | PS/2 (Mini Din) |
LAN Adaptor(s)
| Manufacturer: | Cogent | |
| Model name: | eMaster+ | |
| Interface: | PCI | |
| Connectors: | AUI, *BNC, *TP |
* Adaptor tested with this connector
Sound Card(s)
| Manufacturer: | n/a |
Monitor(s)
| Manufacturer: | Sampo | |
| Model name: | AlphaScan 17GX | |
| Size: | 17" Diagonal | |
| Max resolution: | 1600x1200x60 |
Note that only the specific components listed were tested.
Setup and Installation
Hardware Setup:
See above for individual setup instructions for each adaptor.
CMOS settings:
To Access:
press <F1> when prompted during boot
Settings:
Use Factory defaults
ECU settings (EISA-bus systems only):
n/a
Special installation instructions:
1. FTG Light Pen Driver requires use of Serial Port driver version 3.33, available as Next Answer #1942.
2. Must use latest version of Adaptec AHA-2940 Driver at installation time. If necessary, add Auto Detect ID 0x81789004 per Next Answer #1760.
Driver settings:
Use Configure.app to load and configure the following drivers:
Display
ATIMach64DisplayDriver
Pointing Device
PS2Mouse
FTGSerialLightPen
Network
CogentEM960NetworkDriver
SCSI
Adaptec2940SCSIDriver
Other
Floppy Disk
PS2Keyboard
PCIBus
EISABus
ISASerialPort, #1
ISASerialPort, #2
Serial PortServer
ParallelPort
Known Problems
| See Also: | (None) |