* Adaptor tested with this connector
NEXTSTEP for Intel Processors
Tested Compatible System
| Title: | Eclipse Pentium Pro |
| Last Updated: | June 26 1996 |
| Product Vendor: | Data Net Steve Muir smuir@eclipse.com (408) 747-1100 x 140 |
Explanation of Compatibility Testing
NEXTSTEP Compatible systems are tested by third parties using a test procedure developed by NeXT. NeXT approves the use of the "NEXTSTEP Compatible" designation for these systems based on the completeness of the test results submitted by these NeXT-trained 3rd parties.
For more detailed information on the NICE program, please refer to NeXTanswers document 1903_Compatible_Systems_Tested_With_NEXTSTEP.rtf
| Note: | NeXT accepts no support responsibilities or liability whatsoever for any |
| system | authorized to use the "NEXTSTEP Compatible" designation, nor does NeXT |
| represent | that their test procedures or training--even if followed exactly by the 3rd |
| party | performing the test work--are in any way complete or exhaustive. Known or |
| unknown | errors may be present in configurations which are designated as |
| "NEXTSTEP | Compatible" which could adversely affect the operation of these |
| systems. | Support for compatible systems may be provided by the PC vendor or |
| System | integrator. |
Tested Components:
Data Net reports testing a system configuration consisting of the following components:
Summary information only. Contact Data Net for more specific configuration information
System CPU Board(s)
| CPU: | Intel Pentium Pro, 200 MHz | |
| RAM: | 64MB maximum tested |
SCSI Controller(s)
| Manufacturer: | Adaptec | |
| Model name: | 2940 | |
| Interface: | PCI |
CD-ROM Drive(s)
| Manufacturer: | TEAC | |
| Model name: | CD56S | |
| Interface: | SCSI |
Hard Drive(s)
| Manufacturer: | Hewlett Packard | |
| Size: | 2047 |
Graphics Adaptor(s)
| Manufacturer: | Elsa | |
| Model name: | Winner 2000Pro/X | |
| Video RAM: | 4MB | |
| RAM Type: | VRAM, 60ns | |
| Interface: | PCI |
Serial Port(s)
| Ports: | 2 | |
| UART: | PC87306B |
Parallel Port(s)
| Ports: | 1 | |
| UART: | PC87306B |
Keyboard(s)
| Manufacturer: | Maxiswitch | |
| Model name: | Maxitouch keyboard | |
| Interface: | PS/2 | |
| # of keys: | 104 |
Mice and Other Pointing Devices
| Manufacturer: | Logitech | |
| Model name: | Mouseman Serial-MousePort | |
| Interface: | PS/2 |
LAN Adaptor(s)
| Manufacturer: | Cogent | |
| Model name: | Emaster+ PCI | |
| Interface: | PCI | |
| Connectors: | TP* |
* Adaptor tested with this connector
Sound Card(s)
| Manufacturer: | Creative Labs | |
| Model name: | Sound Blaster 16 PnP | |
| Interface: | ISA |
Monitor(s)
| Manufacturer: | Iiyama | |
| Model name: | VisionMaster 17 | |
| Size: | 17 | |
| Max resolution: | 1600x1200x69 |
Note that only the specific components listed were tested.
Setup and Installation
Hardware Setup:
See above for individual setup instructions for each adaptor.
CMOS settings:
To Access:
Settings:
To Access: press F1 during boot
ECU settings (EISA-bus systems only):
n/a
Special installation instructions:
Driver settings:
Use Configure.app to load and configure the following drivers:
-------Boot drivers------
SCSI Adaptec2940SCSIDriver
Share IRQs: YES
Class Names: SCSIBus Adaptec2940
Cmd Queueing: NO
Share IRQ Levels: Yes
Bus Type: PCI
Driver Version: PROJECT:drvAdaptec2940-15
Synchronous: YES
Level IRQs: YES
Serial ISASerialPort
I/O Ports: 0x3f8-0x3ff
Class Names: ISASerialPort
Bus Type: EISA
Driver Version: PROJECT:drvISASerialPort-3.1
IRQ Levels: 4
-------Active drivers------
Audio SoundBlaster16
DMA Channels: 1
Default Table: SB16SingleDMAChannelPnP
Auto Detect IDs: CTL0024
I/O Ports: 0x0220-0x0233 0x330-0x331 0x388-0x389
LS Input Gain: 3
LS Output Gain: 3
Driver Version: PROJECT:drvSB16Sound-14.1
Bus Type: PnP
IRQ Levels: 5
Network DECchip21040NetworkDriver
Auto Detect IDs: 0x00021011
Network Interface: TP
Share IRQ Levels: YES
Bus Type: PCI
Driver Version: PROJECT:drvDECchip21040-9
Display WINNER
Memory Maps: 0x7c000000-0x7fffffff 0xa0000-0xbffff 0xc0000-0xcffff
Display Mode: Height: 864 Width: 1152 Refresh: 91Hz bitsPerPixel: RGB:444/16
Auto Detect IDs: 0x88805333 0x88b05333 0x88c05333 0x88c15333 0x88d05333
0x88d15333 0x88f05333
I/O Ports: 0x3b0-0x3df 0x42e8-0x42e8 0x46e8-0x46e8 0x4ae8-0x4ae8
0x82e8-0x82e8 0x86e8-0x86e8 0x8ae8-0x8ae8 0x8ee8-0x8ee8 0x92e8-0x92e8
0x96e8-0x96e8 0x9ae8-0x9ae8 0x9ee8-0x9ee8 0xa2e8-0xa2e8 0xa6e8-0xa6e8
0xaae8-0xaae8 0xaee8-0xaee8 0xb2e8-0xb2e8 0xb6e8-0xb6e8 0xbae8-0xbae8
0xbee8-0xbee8
Board Name: WINNER 2000PRO/X-4
VGA Memory Maps: 0xa0000-0xbffff 0xc0000-0xcffff
Known Problems
The Auto Detect ID in the Sound Blaster driver needs to be changed to CTL0024
| See Also: | (None) |